Automotive Electric Suction Door for Audi RS5

Automotive Electric Suction Door For AUDI RS5



 

Specification1. Automatic closing
The closing distance is 8mm, with smart induction and perfect closing
2. Soft-close automatic operation for four doors
Comfortable driving, gracefully getting on/off the car
3. Replacement at original position
Directly replacing the door lock of the original car, 100% nondestructive installation
4.New generation electronic child lock
It can be directly controlled in the driver's seat instead of the rear seat
5. Safe door closing
Smartly identifying the action of door closing, completely locking by lightly pushing the door
6. Opening and closing under any condition
The doors can be opened and closed under emergency such as power failure

GRWA Car Part Electric Suction Doors For AUDI

Our Service

1)Strict quality control during the process
2)Competitive price
3)OEM is acceptable
4)Professional designed
5)High performance full exhaust system customers design and logo are welcome
6)Three years warranty
7)Delivery on time and best after-sales service


1) Automatic closing
The closing distance is 8mm, with smart induction and perfect closing
2) Soft-close automatic operation for four doors
Comfortable driving, gracefully getting on/off the car
3) Replacement at original position
Directly replacing the door lock of the original car, 100% nondestructive installation
4)New generation electronic child lock
It can be directly controlled in the driver's seat instead of the rear seat
5) Safe door closing
Smartly identifying the action of door closing, completely locking by lightly pushing the door
6) Opening and closing under any condition
The doors can be opened and closed under emergency such as power failure
7)Logic anti-pinch
When the door is closing, the door will immediately stop closing when it contacts the finger, thus preventing pinch
8)Super silence
The noise is lower than 40db, you will not listen any noise

1)High quality raw materials
It is designed in divided structure with simple and convenient installation, avoiding complicated wiring.  The metal part is made of high strength chrome steel and the plastic part is made of high strength compound material.  Application of standard wire harness and terminals, standard waterproof switch.
2)Transmission gear
The transmission gear is made of powder metallurgy and aviation material PM5.1. It is firm and wear-resistant, it will not break, and it has low working noise
3)Locking hook technology
The main function of the locking hook is to be able to close the door accurately and seamlessly and keep the door securely locked.
As a key component matching the lock body, the lock hook guarantees the central component of the entire lock system without malfunction. Therefore, higher  standards are implemented when producing hooks. A lot of R&D and testing work was carried out. The lock is characterized by a strong tensile strength that  meets special criteria and reduces operating noise even more.
4)Product advantages
According to the data design of the original vehicle lock, the method of directly replacing the original vehicle lock is adopted to  realize the non-destructive installation, special docking and linking, and the installation position is matched with the original vehicle.
5)Electric suction door module
lock block module - lock body, drive device - gear motor box, self-suction control system - drive control circuit,  door position detection system - inhaul cable, Hall dual standby detection system,the original car drive cable Parts, original car special harness.
6)Electric suction lock principle
By using the motor drive to pull the car door lock bolt, it solves the problem that can't be closed,  so as to achieve the effect that the user only needs to gently close the door to lock the door.